Press "Enter" to skip to content

Essential Maintenance Tips for Your Washing Machine

Your washing machine is a household work horse; absolutely essential yet often taken for granted. Considering that a washing machine is a big ticket item it makes sense to protect your investment and keep it running efficiently as long as possible. Here we give you our top five maintenance tips to keep your washing machine in tip top shape for years to come:

1.) Check the water intake hoses. A failure here could cost you big money in water damage costs. Most manufacturers recommend that you examine your washer’s hose once a year. Look for cracks, blistering and splitting; if you see any then it’s time to replace that hose! You can pick up new hoses for your washer in home improvement stores for around $20 washer repair pasadena.

Installing the new hoses is very simple. Make sure you cut off the water supply to the washer before you begin. Unscrew the old hoses and screw in the new hoses. Make sure to screw them on tightly without stripping the threads.Then it’s time to turn on the water and check for leaks.

2.) Keep it level. If your washing machine “dances” or rocks during the spin cycle you should check to make sure that it is properly leveled. That means making sure all four of it’s legs are resting on a level surface but it also can mean adjusting the legs themselves.

The adjustable legs of a washing machine are held in place by a lock nut. Simply remove the lock nut, adjust the legs until they are level and replace the lock nut tightly into place. You can use a carpenter’s level to make sure you got it right.

3.) Clean the surface. To avoid dust and grime from infiltrating the mechanical parts of your washer you should clean the exterior surfaces of the washer and also inside the drum on a regular basis. You can use a damp cloth with a mild detergent to wipe the surfaces clean.

4.) Treat limescale. If you notice a white, powdery build-up in the drum of your washer then you may have a limescale problem. Limescale is caused by hard water mineral deposits and if left untreated it can make your washer less efficient, possibly even shortening it’s useful life. You can purchase an inexpensive limescale treatment at home improvement stores. To treat your washer simply set it to the hot water cycle, let it fill with water and add the treatment. Allow the cycle to run it’s course and you are all done!

5.) Wash smarter. Use liquid, not powdered soap and only add the soap after the washer is filled with water. Don’t overload or under-load your washer; two thirds full is perfect. Make sure to read the owner’s manual for your particular washing machine and follow the manufacturer’s recommendations for best results.

Be First to Comment

Leave a Reply

Your email address will not be published. Required fields are marked *